Copyright © 2020 PMJ Heaters Manufacturing | Industrial Heaters Johor Bahru (JB), Malaysia | Thermocouples
Mobile :: Subpage masthead :: About us
Manifold Heaters

Manifold Heaters

Unlike the conventional tubular heaters, manifold heater’s flexibility is the key that makes it difference. It can be bent to fit virtually any 2D or 3D groove using special tool set. The precision fit optimizes heat transfer to the working surface.
While some may call manifold heater as mold heater, precise forming of the heater is required for it to fit properly into the groove in the hot runner mold. To ensure this fit, we normally use a template as an inspection tool in the forming process. This template can be supplied by the customer or manufactured by PMJ as per customer’s design.
The manifold heaters are available in round diameters of 4.0mm, 5.0mm, 6.7mm and 8.3mm.
Manifold heaters are tested for Insulation test, High Voltage Test and Leakage Current test, in order to ensure your worry-free usage.

Cemented curing surface can be done upon requested.
  • Various heater diameter to choose from, from Ø4.0mm – Ø8.3mm
  • Can be installed onto almost any groove placement
  • Higher wattage and better heat transfer
  • Can be installed by inexperienced personnel
Common Applications
  • Hot Runner System
  • Heating of Platen
Manifold Heaters   Manifold Heaters        
PMJ Heaters Manufacturing


Contact us at +607-354 3427   +607-354 3427
Fax us at +607-354 8205   +607-354 8205
Email us at   [email protected]


Address   No.3, Jalan Mutiara Emas 5, Taman Mount Austin,
81100 Johor Bahru, Johor.